VG.net Readme

This document contains notes for using VG.net. You can find additional tips and tricks for VG.net at the development blog: http://weblogs.asp.net/frank_hileman. The VG.net home page is www.vgdotnet.com.

1. Getting Started

Please see the VG.net Users Guide section titled "Getting Started". You will find a shortcut to the Users Guide on the Start Menu, under the folder VG.net.

Missing Toolbar buttons? Sometimes the toolbar buttons and context menu items for Visual Studio .NET fail to install correctly. If you notice missing items, please open the Add/Remove Programs window in the Control Panel, find VG.net, click on the link called "Click here for support information", and click on the Repair button.

2. License Agreement

The end user license agreement can be found in the file EULA.rtf, found in the main VG.net installation folder. Please note that the file Prodige.Drawing.dll can be redistributed, but no other files can be redistributed.

3. Support

If you have purchased a VG.net Picture Designer license, you will receive support contact information in your email receipt. If you are using a Lite or evaluation version of the Picture Designer, there is no official support, but please send bug reports or comments to support@vgdotnet.com, or post a message on the VG.net discussion forums at www.vgdotnet.com/forums.

Thank you!

4. Changes

Version 2.7a

Designer Enhancements

• Use the new TranslucentForm class to replace your entire user interface with a top-level Picture, eliminating even the window border and caption. With this class, and the associated DisplayInTranslucentForm method on Picture, you can create windows with per-pixel translucency and arbitrary shapes. Edge anti-aliasing is alpha blended, making it superior to the use of the Form Region property. See the following article:

  A Resizable Vector Graphics Calculator with Per-Pixel Translucency

• Use the new WindowOperation property on Element to specify the window operation triggered by a mouse event on the Element when displayed in a TranslucentForm: Close, Minimize, resize, etc. See the article link above for more information.
• Within the Forms designer, you can now drag and drop a Picture from the Toolbox onto a Canvas to display that Picture in the Canvas. You can also select the Toolbox item and click on a Canvas. The same operations are supported for the new TranslucentForm class.
• Use the new BaseStyle property in the Style class to collect common appearance properties in a single Style that can then be inherited across mutiple Styles. BaseStyle is a string. Consider two Styles, one named Style1, and one named Common. If you set the BaseStyle property in Style1 to "Common", Style1 will inherit all the property settings in the Common Style. Changes to Common will change the appearance of all Elements that reference Style1.

Samples

• Source code for the new TranslucentCalculator and TranslucentClock samples is installed by the Extras package. The TranslucentCalculator is a "skinning" example: it demonstrates how to create a fancy user interface with gel buttons and 3D effects. It also demonstrates how to separate a user interface from core application logic. Both TranslucentCalculator and TranslucentClock use TranslucentForm.
• Use the Button base class in TranslucentCalculator to create your own custom buttons.

Run-time Only Enhancements

• All PathGradientFill display is now optimized for speed. This is good news for Pictures with 3D effects.
• In addition to the general optimization above, similar PathGradientFills used across similarly shaped Elements now share gradient cache data. Rows of buttons or other similar Elements are much faster and consume less memory. This opens up the use of 3D effects for complex interfaces. The TranslucentCalculator sample takes advantage of this feature. You do not need to make any changes to take advantage of this optimization; you merely have to use Elements with similar (combined) fill properties and shapes. Rotated Elements can also share cache data -- rotation has no effect on the ability to share.

• All mouse events in the Picture class now bubble all the way to the Canvas and TranslucentForm. The new events in Canvas and TranslucentForm:

  • PictureMouseEnter
  • PictureMouseLeave
  • PictureMouseMove
  • PictureMouseDown
  • PictureMouseUp
  • PictureClick
  • PictureDoubleClick
  • PictureMouseHover
• Use the new ElementPoint property in ElementMouseEventArgs to determine the mouse position in the coordinate space of the Element raising the event. For LeafElements, including Shapes, the point is in the Element space, the same space as the Bounds and internal points. For a Group or Picture, the point is in the Child space, the coordinate space common to all children.
• The ColorUtility.ColorCombine methods are now optimized for speed.

Bug Fixes and Obsolete Members

• A solid color Stroke, with no Color property set, but with the Opacity property set, ignored the Width property during display. This bug is fixed.
• The FSize and Vector constructors taking Double parameters are eliminated. This change was made to improve C++ support. Any code using these constructors, that no longer compiles, can be fixed with an explicit cast to float, or Single in Visual Basic, on each parameter.
• A PathGradientFill with CoordinateType set to Absolute failed to serialize correctly. This bug is fixed.

Version 2.6b

Run-time Only Enhancements

• The new GetTextPixelBounds method in the Shape and PointText classes computes the rectangular area enclosing all pixels displayed by text. This method always recomputes the correct area, returning the correct result even if the object has never been displayed. By contrast, the PixelBounds property returns a rectangle enclosing the pixels last displayed, and cannot be used before an object is first displayed.

Bug Fixes and Obsolete Members

• The CaptureMouse method failed to capture mouse input when called on a top-level Picture (a Picture connected to a Canvas). The method now works correctly.
• A non-composite Element (an Element which is not a Group or Picture) with the Enabled property set to false failed to update its PixelBounds when a Parent was transformed, zoomed, or panned, causing incorrect erasure or display. This bug has been fixed.
• When a Picture was added to a System.ComponentModel.Container, mouse events would no longer be raised. This also caused a bug in the DesignMode property, which returned true when a Picture was added to a Container. These bugs have been fixed: when a Picture is added to a Container, DesignMode returns false (except in Visual Studio), and mouse events are raised.
• The TextAppearance RenderingHint property did not function correctly. An Element with the TextAppearance.RenderingHint property set influenced the text rendering of other Elements within a Picture. This problem has been fixed.
• When serializing to a MyXaml file, a property tagged with a DesignerSerializationVisibilityAttribute with a value of DesignerSerializationVisibility.Content, which was not a collection, was incorrectly serialized in one situation: if all in the referenced object were set to default values, the property would be serialized. Now the property will not be serialized in that situation.

Version 2.6a

Designer Enhancements

• The new CornerRadii property in the Rectangle class allows you to create rounded rectangles with corners where the arc radius differs in the x and y dimensions. The new Radii structure holds values assigned to the CornerRadii property.

Run-time Only Enhancements

• The HitTest method in Element has a new overload that takes as a parameter an ElementCollection. Use this method when you would like to get the entire "stack" of Elements hit by a device point. That is, you will obtain the leaf Element hit, followed by its Parent, followed by each Parent higher in the hierarchy.
• Use the new static FindFontFamily event in the TextAppearance class to display dynamically loaded fonts. This event is raised whenever a TextAppearance needs to look up a FontFamily. If you have loaded fonts using a PrivateFontCollection, the FindFontFamily event enables you to display these private fonts. In your event handler, examine the FamilyName property of the FindFontFamilyEventArgs parameter. If the name matches one of your private family names, set the FontFamily property before returning from the event handler, and your FontFamily will be used. If there is no match, do nothing, and the normal FontFamily searching algorithm will be used. See this forum entry for some code samples: http://www.vgdotnet.com/forums/viewtopic.php?t=193
• Use the new PropertyChanged event in Element to monitor property changes. Currently this event is only raised for the Element.Parent and Picture.Control properties. In the future, this event will be raised when for many different property changes.
• Use the new TransformationReference.Origin field to set the TransformationReference of an Element to (0, 0):
  element1.TransformationReference = TransformationReference.Origin;
• Set the new static property, ManagedCodeOnly, in Display to true when you build a dll that must run in a restricted security setting, such as Internet Explorer. In the future, we will add optimizations using PInkoke that will be bypassed when ManageCodeOnly is true.

Bug Fixes and Obsolete Members

• The Zoom To Selected command, and all selection adornments now behave more logically with invisible Elements. Formerly, the command might zoom to the wrong area, or the adornments might enclose the wrong area.
• A Group containing no Elements, when cloned using the Clone method, produced a Group that threw an exception when attempting to add Elements. This bug has been fixed.
• A Group which was cloned or duplicated in the designer sometimes contained copies of the Styles and ImageData objects referenced by children of the Group. Because of this problem, the children of the Group would fail to update when the original Style or ImageData was modified. This bug has been fixed.
• FRectangle structures which are transfomed by a negative scaling factor using a Scaling or SclaingTranslation no longer result in an FRectangle with Width or Height set to a negative number.
• The Users Guide failed to open from the Start Menu shortcuts if a Visual Studio beta version was previously installed. This problem has been fixed.

Version 2.5

This version contained only internal changes.

Version 2.4b

Designer Enhancements

• If you wish to make all invisible Elements visible at design-time, select the top-level Picture and set the InvisibleAreDisplayed property to true. This has no effect at run-time.
• If you wish to be able to select disabled Elements by clicking with the mouse, select the top-level Picture and set the property DisabledArePickable to true. A "disabled" Element is one with Enabled set to false.

Run-time Only Enhancements

• The CustomElement copy constructor is now protected, to be used by derived classes. We added the InternalFill, InternalStroke, and InternalTextAppearance protected properties, as well as supporting members so that a CustomElement based class can expose a Fill, Stroke, or TextAppearance property.
• In DrawContext, we made several members public to support CustomElement derived clases: Font, TextBrush, GetFullTextBounds, GetTextPixelBounds, DrawText, PushTransformation, and PopTransformation.
• We created a preliminary CustomElement sample, which draws text along an arbitrary Shape path. If you need to build a CustomElement (an advanced topic) please request a copy of this sample. In the future the sample will be added to the Extras package.

Bug Fixes and Obsolete Members

• In the VG.net Designer Lite version only, if you attempted to exceed the object count limit, the Rotation and Shearing adornments would disappear. This bug is fixed.
• Setting the Enabled property from true to false on a Shape caused problems with mouse events and display updates, if the DrawAction was set to Fill. This bug is fixed.
• We added an overload for the Element HitTest method: bool HitTest(Vector point, out Element hitElement). The existing HitTest method has an additional boolean parameter called skipDisabled. This parameter is no longer supported, and the HitTest(Vector, bool, out Element) overload is now obsolete.

Version 2.4a

Designer Enhancements

• Text can now draw a Stroke outlining each character. The TextAppearance class has new Stroke, StrokeVisible, and FillVisible properties.
• Use the new PointText Element to place text relative to a point on the screen. PointText is specified by a single point, and never wraps. The TextAppearance HorizontalAlignment and VerticalAlignment properties control the positioning of PointText. Read the topic titled "PointText" in the Users Guide for more information.
• When using the PathGradientFill, wide and short gradients, as well as tall and narrow gradients, are now better quality, without any reduction in speed.
• When editing a PathGradientFill, if the FocusPoint adornment has been moved out of the sample entirely, a click within the sample area will move the adornment back into the sample.
• Custom colors added to the custom color list now persist between editing sessions.
• The new ScrollableArea property on Picture allows you to specify the coordinate area around which you can scroll at design-time. This allows you to easily place Elements far outside the automatically computed scrollable area. The ScrollableArea property, if set to any value other than (0, 0, 0, 0), will be used by the Canvas at run-time as well, when AutoScrollPicture is true. Read the topic titled "The Scrollable Area" in the Users Guide for more information.
• Active Group mode is added to the Picture Designer. This mode lets you work on Elements within a Group without ungrouping them. Read the topic titled "Active Group Mode" in the Users Guide for more information.
• Alignment, sizing, spacing, and centering commands have been added to the Picture Designer. These commands are on the Layout. To show the Layout toolbar, right click on an empty toolbar area in Visual Studio .NET. Read the topic titled "Layout Commands" in the Users Guide for more information.
• If you right-click on an empty area of the designer surface and select the Paste command, the pasted Element is now located at the position of the click.
• Pressing the Shift key when dragging the mouse to lasso a set of Elements now adds to the existing selection, instead of replacing it. See "Selecting Elements" in the Users Guide for more information.
• Pressing the Control key when dragging the mouse to lasso a set of Elements now performs a disjoint selection: previously selected Elements enclosed by the lasso are deselected; enclosed Elements not previously selected are selected. See "Selecting Elements" in the Users Guide for more information.
• Pressing the Alt key when pressing down the left mouse button and dragging now forces the Picture Designer to enter lasso mode, whereby you can select enclosed objects. The Alt key prevents objects underneath the mouse press from being immediately selected, so you can begin a lasso operation even if there is no empty space on the designer surface.
• The new RotationShearingAdornmentVisible property on the top-level Picture, within the Picture Designer, allows you to make the rotation and shearing adornments invisible, so they will not interfere when you have no need for rotation or shearing.
• The new HotkeyDisplay property on TextAppearance allows you to control how the "&" (ampersand) character is interpreted when displaying text. The ampersand character can now be used to underline any character in the display string.
• The "VG.net Picture" template file can now be selected from the "Add New Item…" command within a web project. This makes it easier to add Pictures to your web applications.
• The Users Guide is updated.

Run-time Only Enhancements

• The ElementHitTest and EnclosedTest methods have been moved from Picture to the base class Composite, so you can now use the methods on Groups. See "Composite class" in the Reference documentation. See "Grouping Elements" in the Users Guide for more information on Groups.
• The new CustomElement class is a base class you can use to create Elements with completely custom drawing code.
• The ElementCollection AddRange method now has an overload taking as input an EnclosedElementCollection.
• Improved PixelBounds calculation accuracy for all Shapes except Paths, which in turn has improved animation performance.
• Picture BeginInit and EndInit are now virtual, so you can override them.

Bug Fixes and Obsolete Members

• PathGradientFill objects now print correctly.
• The Picture ClipRectangle property now correctly clips when printing or using Picture.RenderTo.
• The Canvas AutoScroll property is obsolete, and will cause warnings during compilation. The new AutoScrollPicture property replaces AutoScroll.
• The Canvas AutoScrollMargin and AutoSizePadding properties are obsolete. The new PicturePadding property replaces both AutoScrollMargin and AutoSizePadding. If you currently use the AutoSizePicture property, please check to see if PicturePadding needs to be set to (0, 0) - the default is (20, 20).
• A line of pixels on the top and left of a Canvas were incorrectly drawn when the BackgroundImage property was set. This bug has been fixed.
• Many Elements no longer allow Width or Height to be set to a value less than 0, to prevent exceptions during the display pass.
• Unless SetBoundsCore is overridden, a Picture with a non-zero Width cannot have its Width set to 0. The same constraint exists for Height.
• Undo and Redo of a Closed Polyline now works correctly when editing the Polyline points.
• Invisible elements were drawn when printing or using the Picture RenderTo method. This bug has been fixed.
• Picture.Invalidate, called when a Canvas BackColor or BackgroundImage property changed, did not cause the screen to update correctly when multiple Canvases were used simultaneously. This bug has been fixed.

Version 2.3

• Animation performance has been significantly improved in complex Pictures with many objects, when several widely separated areas of the screen are animated simultaneously. Read more, and run the sample SCADA simulation at:

  http://weblogs.asp.net/frank_hileman/archive/2004/12/06/276001.aspx

• Several new commands have been added to the Picture Designer:
  • TAB selects the next Element in the z-order, within the containing Parent, which may be a Group. SHIFT + TAB selects the previous Element.
  • ARROW keys move the selected Elements in the direction of the arrow, in increments of the grid spacing. SHIFT + ARROW key combinations increase or decrease the size of Selected Elements. The CTRL key, in conjunction with any of the movement or resize key combinations, will change the unit of increment to a single pixel.
  • Bring Forward and Send Backward move Elements forward and backward in the z-order. These were added in 2.2b.
  See the new help topic titled "Picture Designer Default Shortcut Keys" for more information.
• The new PictureImporter class can be used to provide plug-ins to the Picture Designer that can convert vector graphics data in another format to a VG.net Picture, either by using a file or the clipboard. PictureImporters can also be used at runtime. If you wish to create or sell a custom PictureImporter, please download the template solution at:

  http://www.vgdotnet.com/support_files/TestImporter.zip

• When Canvas.AutoScroll was turned on, then off, a NullReferenceException could be thrown. This bug has been fixed.
• Potential change in behavior: In a PathGradientFill, the FocusScaling propery now overrides any setting on a PathGradientFill in a parent. In other words, this property is no longer subject to "appearance inheritance". This was done to ensure that child fills with a default setting for FocusScaling produce the correct effect.
• The ElementCollection.AddRange method can now be used to transfer child Elements from one Composite (Group or Picture) to another, without throwing a NullReferenceException.
• The new IsBoundsValid property on the Composite class determines if a Composite (Group or Picture) has a valid Bounds. An invalid Bounds is produced when a Group or Picture contains no child Elements. Composites with an invalid Bounds no longer contribute the point (0, 0) to parent Composite Bounds computations -- they are ignored in these computations.
• The Vector.LineSegmentIntersection method is added. This method determines if line segments intersect, and if an intersection is found, returns the point of intersection.
• The FRectangle.RelativeToAbsoluteRectangle method is added. Use this to convert relative rectangles, expressed as fractions of the width and height, to absolute rectangles.

Version 2.2

• The PathGradientFill class has been added. This enables you to create radial gradient fills, or gradient fills based on any path or Element shape. It is very useful for 3D effects. Please see the VG.net blog for tips on using the PathGradientFill for 3D effects: http://weblogs.asp.net/frank_hileman. By default, PathGradientFills are cached as images for speed. You can modify the behavior of this caching with the PathGradientFill.Quality property.
• The PathInterpolater class, the Shape.PathInterpolator property, the Element.PathMove method, and the PathPosition structure have been added. The PathInterpolator object can be used to convert arc lengths to points and tangents on a Shape, or vice-versa. It can also be used to find the closest point on the Shape path to an arbitrary point. PathMove moves any Element along the path defined by any Shape. PathMove will optionally rotate the Element to align with the tangent to the path. The new PathMove sample demonstrates how to use these new types and members.
• The AnalogClock sample has been updated to use path gradients. The EventHandling sample has also been given a much-needed face-lift :).
• The following properties in LinearGradientFill have been obsoleted and replaced by new ones: BlendFocus replaces Focus; BlendFocusScale replaced FocusScale; CoordinateType replaces BoundsType. The FillCoordinateType enum replaces FillBoundsType. Your existing Pictures will compile, but you can eliminate obsolete warnings by running the ReplaceNames macro in ProdigeNameFix.vb, in the VG.net installation folder.
• Copying objects in the designer sometimes inverted the order in which local appearance properties and Style references were applied -- the Style incorrectly taking precedence. This bug has been fixed.
• The MoveForward and SendBackward commands have been added to the Picture Designer. These allow you to move one or more Elements forward or backward a single index in the z-order.
• When editing path points in the Picture Designer, control point adornments now appear in front of anchor point adorments, making it possible to grab previously obscured control points.
• The Fill dialog box in the Picture Designer now displays previews of the selected Element in the sample boxes.
• In the Picture Designer, all changes to Style objects now immediately affect the display surface. If you cancel a change, the changes disappear.
• In the Picture Designer, the point editing mode is cancelled when a modal dialog is opened.
• The ImageDataObjects collection in a Picture is now cloned when the Picture is cloned.
• The Picture.DisplayInForm method now uses the monitor associated with the Form to compute the optimum size.
• Potential breaking change: Shape.GetGraphicsPath is now called GetTransformedGraphicsPath, and GetGraphicsPath now returns an untransformed GraphicsPath. The method Shape.AddToGraphicsPath has been added.
• The gradient displayed by LinearGradientFill objects can now be defined using two points instead of a rectangle. This is useful when rotating a gradient within a circular or elliptical object, such as an Ellipse, Arc, or Pie. The StartPoint and EndPoint properties define a vector for the gradient line.
• The Click and DoubleClick events are now correctly raised only for Elements which also received a MouseDown event. Formerly, it would be raised for any Element over which a mouse button was released.
• It is now possible to repair a VG.net installation without keycode errors.
• The new Element.GetTopPicture method returns the top-level Picture displaying an Element. The new Element.GetCanvas method returns the Canvas displaying an Element.
• Added the RelativeToAbsoluteRectangle method to the FRectangle class, and the RelativeToAbsolutePoint method to the Vector class.
• Added the DistanceToSegment method to the Vector class, for computing the distance from a point to a line segment.
• The reference bounding box used to display linear and path gradient fills for text is now "tighter" -- fitting the text bounds more closely. Formerly the Element bounds was used. Now you can create more dramatic gradients without editing the Bounds property of the LinearGradientFill.
• A new ScalingTranslation constructor has been added for creating a ScalingTranslation that transforms a source rectangle to a destination rectangle using a scaling equal in both dimensions. This constructor has a Boolean third parameter.
• MultiPointShape objects with a zero-sized Width and Height no longer throw an exception during the display pass.

Version 2.1b

• Multi-line text can now be entered into any Shape in the Picture designer. Use the "..." button to open a dialog box in which you can enter multi-line text.
• The rotation and shear adornments are hidden in the Picture designer when an Element is less than 20 pixels long and wide. To show the adornments for small Elements, zoom in, or select the Element and use "Zoom to Selected" in the Drawing toolbar.
• The ImageZoom sample has been added to the Extras package for VG.net customers. This sample demonstrates how to use the ClipRectangle property and ZoomToParentRectangle method to zoom to selected areas of an Image. The sample is not included in the Lite version.
• The Scalability sample incorrectly computed average modification times; they were consistently low. This bug has been fixed.
• TextAppearance and Stroke objects with a SolidFill with only Opacity set (not Color) did not correctly serialize the Opacity, and instead serialized the Color, making it impossible to set only opacity. This bug has been fixed.
• The ClipRectangle property can now be set on a Sub Picture within the designer.
• The ClipRectangle on a Picture now affects its PixelBounds (it is intersected) as well as the internal bounds reported to any Parent of the Picture, when that Parent computes its own Bounds.
• The ZoomToParentRectangle method was added to Picture. This method is used in conjunction with ClipRectangle to zoom a SubPicture to a rectangle specified in the Parent coordinate space.
• Resizing or moving a Sub Picture within the designer will now resize and move the ClipRectangle on that Sub Picture.
• The ClipRectangle on a Sub Picture now correctly prevents mouse events from being raised on the clipped portion of child Elements.
• In some circumstances, setting the ClipRectangle on a Sub Picture could cause incorrect rendering of Elements higher in the z-order. This bug has been fixed.
• Sub Pictures with a ClipRectangle set cannot be grouped within the Picture designer. This restriction was made to prevent problems when later transforming the Group. The ClipRectangle property is specifically for creating "view ports" on the objects within a Sub Picture.
• Dragging and dropping a set of Elements from one designer to another could not always be "undone" correctly. The designer transaction was incorrectly recorded. This bug has been fixed.
• The Stroke TransformWidth property, when set to false, now produces the correct pen width when the Picture PageUnit or PageScale properties are set to non-default values.
• Polylines with a zero sized width or height no longer throw an exception if rendered with a LinearGradientFill Stroke.

Version 2.1

• The WebControls sample has been added. This sample demonstrates how to use VG.net graphics within an Internet Explorer client. Any VG.net-based Control can be used in Internet Explorer. The sample also demonstrates how to use a single Style object to modify the base color of an entire user interface. The source code for this sample is in the Extras package available to VG.net customers. The source code is not included in the Lite version.
• The Sockets sample has been added. This sample is divided into two parts: a client and a server. The server generates simulated real-time data and sends that data to the client via TCP/IP. The client provides a visualization using some vector graphics components.
• The ToolTip sample has been added, demonstrating how to use the new MouseHover event available on every Element. This sample also demonstrates how to use IExtenderProvider to provide pseudo-properties on Elements.
• The Scalability sample has been added. This sample provides a framework for performance testing. It is used by the VG.net developers to test and optimize the display engine. The sample can test from 1,000 to 500,000 VG.net Elements.
• The Picture designer now has basic printing support for Pictures. This feature is not available in the Lite version.
• The RenderTo(Graphics) function has been added to Picture. This function serves several purposes. You might use it to add printing support to your applications, or you might use it to render Pictures to bitmaps on a web server, and transmit the bitmaps to the web client. This function is not available in the Lite version.
• The MouseHover event has been added. This event is raised on every enabled Element whenever the mouse pointer hovers over the Element for the time specified in Picture.MouseHoverTime.
• The CaptureMouse and ReleaseMouseCapture functions have been added to Element. CaptureMouse captures all mouse move events, directing them toward a single Element, until ReleaseMouseCapture is called. With these functions, you can create sliders and knobs that behave in the same way as a Windows.Forms slider.
• The Stroke.TransformWidth property now works correctly, and can be set within the Stroke properties dialog in the Picture Designer. TransformWidth defaults to true. When a Stroke's TransformWidth is set to false, Shape lines and edges do not change width as you zoom in and out. The width is constant, regardless of the transformations on Shape or its parents.
• The performance of the run-time engine has been improved.
• A call to Picture.Elements.DisposeAll now correctly causes the erasure of all disposed Elements.
• Invisible Elements that were made visible once incorrectly raised mouse events (acting as if enabled). Invisible Elements now correctly behave as if Enabled equals false, under all circumstances.
• Several changes were made to simplify the use of VG.net Pictures within Internet Explorer. It is no longer necessary to give Prodige.Drawing.dll any special permissions. Addionally, thread safety was added to critical data structures (IE uses multi-threading even for paint events).
• The AutoSizePicture property in Canvas sometimes caused Pictures to be incorrectly positioned. This bug has been fixed.
• BoundedElement objects (Rectangle, Circle, etc) no longer throw exceptions during the display pass if Width or Height is set to 0.
• Pictures contained in external assemblies could not be added to the Visual Studio .NET ToolBox. This bug has been fixed.
• Images saved within MyXaml files from the Picture Designer now correctly save in their original format, instead of converting to PNG.
• Tag properties containing strings now serialize correctly to MyXaml.
• Prodige assemblies are now installed in the GAC. The prevents an error from occuring when a Picture is opened after previously opening a closing a solution in Visual Studio .NET.

5. Future Features

To request an enhancment, please post to the Enhancements forum at:

www.vgdotnet.com/forums

Some possible future features:

• A MicroDesigner developement framework to simplify the construction of custom designers. Please read about this on the VG.net forums: www.vgdotnet.com/forums
• Layout engines, including integrated support for anchoring and docking.
• A port to the Compact Framework. If you need such a version, please let us know.
• Digital filter effects, such as blurring, and the ability to add custom filters.
• Integrated support for shadows.
• A Layer property on each Element, containing a string, will allow you to assign any Element, at any level, to a Canvas-wide Layer. You can toggle the visibility or Enabled property on all Elements associated with a particular layer by modifying a property on the Layer. This is useful for showing/hiding levels of detail in large scale SCADA and map displays.
• Currently, the transformation reference point can be set in the Properties window. We will add a way to modify the reference point by dragging the mouse.
• Automatically create a Canvas displaying a Picture when a Picture is dropped onto a Form or UserControl.
• When the user selects a sub-Picture, the Properties window will list the Styles defined in that sub-Picture, and the user will be able to modify these Styles, or remap them to other Styles.
• Clipping on Groups.
• Path clipping on Pictures. Rectangular clipping is currently supported.
• An Opacity property for an entire Element or Picture; currently opacity is defined separately for each BrushStyle or PenStyle.

Copyright © 2003-2005 Prodige Software Corporation. All rights reserved.